ホーム > 製品情報 > RC1

RC1

  • メモリボタン:ボタン1、ボタン2、ボタン3、ボタン4にはメモリ機能があります

  •  A.メモリモードを設定する方法:
     1. まずはご希望の車高に調整してください。
         そしてボタン“ALL”を押してください。
         ボタン“ALL”を押しますと画面は全選択の状態になります。
     2. ボタン1(メモリモード1)を約2秒長押しで設定します。

        M1はメモリモード1を表示されます。
        M2、M3、M4はメモリモード2、メモリモード3、メモリモード4を表示され
      (ホーム画面でM1、M2、M3、M4を表示されましたら、設定成功。)
      (ホーム画面でM1、M2、M3、M4を表示されない場合、設定失敗。)

  •  B.メモリモードを使用する方法:
     1. メモリボタンを押してください。
       (ご自由にボタン1、ボタン2、ボタン3、ボタン4を選んでください。)
     2. 画面はメモリモードに設定される数値を表示します。
     3. もう一度同じボタンを押してください。
       (STEP1はボタン1を押しますとSTEP3もボタン1を押してください。)
         ボタンを押しますと、自動的にメモリの車高に調整します。

  • C.メモリボタン:ボタン4   
    “ボタン4”は一番低い数値しか設定されません。
  • 概要
  • Product Description:

    1. Speed: (It’s for adjusting interval time of solenoid valve)
        Options: 1~20 levels (Default: 10 level). 1->20 levels (slow>fast)

    2. Key on: ( It will set memory ride height automatically when ACC on)
       Options: 1/2/3/4/OFF (Default: OFF) (Without inputting the signal of height sensor kit, the function is invalid)

    3. AUTO: The computer will measure the ride height automatically when turns on this function.
       If it’s not original setting (memory 1/2/3/4), the ride height will be adjusted to original setting ride height.

    4. ADVANCE: (When turns on “AUTO” function, you can choose interval time to operate automatically)
       Options: 10/20/30/60/120/180 (sec) (Default: 60 sec)
    ※ The 3rd and 4th options will be available with height sensor kit. ( Without inputting the signal of height
       sensor kit, the function is invalid )

    5. Compressor Detect: (Default: OFF) ON/OFF (when ACC on and operating the memory function or raising
        up ride height manually, the pressure in air tank decreases more than 30PSI will start the compressor.
        The compressor will stop automatically when the pressure is filled to the setup of Function 7.

    6. Compressor Level: (Default: B) Options: A: 100 on- 150 off B: 135 on- 175 off C: 160 on- 200 off
        (You can set the stopping pressure of pressure switch and stop pressure. This function will be available
        when Acc on.) Protection Plan for compressor overload :
        1. Working for 30 minutes.
        2. Working for 35 minutes.
        3. Working for 40 minutes.

    When reaching the condition of OFF, the compressor will stop working.
    When relaxing more than 5 minutes, the total working time returns to zero.

    ※ When working standard reaches “1” (Function 6-compressor level) Auto setup is B; if the original setup
        is B then no need to change. If original setup is A, then no need to change.
    ※ When working standard reaches “2”, the setup need to be A no matter what the original setup is.
    ※ When working standard reaches “3”, need to turn off the compressor and restart it after 15 minutes break.
        (the screen of remote will display countdown ) (Turns off ACC then turn on will not affect the action of
        countdown)

    P.S. When working standard reaches any item of 1/2/3 (7 compressor level), the manual
        setup data will be deleted and will change to setup A: 100 on- 150 off.